Monday, February 1, 2010

Book List for IES(SUBJECTIVE)

ELECTRONICS ENGINEERING


S.No.
SUBJECT
AUTHOR
1.
Electronic Devices and Circuits & Analog Electronics--

(i)

(ii)

(iii)

(iv)

(v)

(vi)

Integrated electronics : Analog and Digital Circuit and system

Microelectronic Circuits

Electronic Devices and Circuits

OP Amp and linear Integrated Circuit

Solid State electronic devices

Semiconductor devices

Jacob Millman & Christos C. Halkias

Sedra & Smith

J.B. Gupta

Ramakant A. Gayakwad

Streetman and Banerjee

S.M.Sze

2.
Communication System

(i)

(ii)

(iii)

(iv)

(v)

Communication System

An introduction to Analog and Digital Communication

Communication System : Analog and Digital

Modern Digital and Analog Communication System

Electronic Communication System

Simon Haykins

Simon Haykins

Singh and Sapre

B.P. Lathi

Kennedyand Davis

3.
Signal and System
Oppenheim and Willsky
4.
Optical Fiber Communication
Senior
5.
Satellite Communications
Pratt and Bostian
6.
Monochrome and colour
R.R. Gulati
7.
Control System

(i)

(ii)

(iii)

Control System Engg.

Automatic Control System

Linear Control System

I.G. Nagrath & M. Gopal

B.C. Kuo

B.S. Manke

8.
Electro Magnetic Theory

(i)

(ii)

(iii)

(iv)

Elements of Engineering Electromagnetics

Elements of Electromagnetics

Engineering Electromagnetics

Antenna and Wave Propagation

N. N. Rao

Sadiku

W.H.Hayt

K.D. Prasad

9.
Digital Electronics

(i)

(ii)

(iii)

Digital Design

Digital Systems

Modern Digital Electronics

M. Morris Mano

Tocci & Widmer

R. P. Jain

10.
Computer Engg.

(i)

(ii)

Microprocessor Architecture, Programming & Application

Computer Organization and Structure

Ramesh S. Gaonkar

Stalling

11.
Microwave Engg.

(i)

(ii)

(iii)

Microwave Devices and Circuits

Microwave Engineering

Microwave Engineering

Liao

Sanjeev Gupta

Pozar

12.
Network Theory

(i)

(ii)

Networks and Systems

Engineering Circuit Analysis

D. Roy Chaudhary

Hayt

13.
Electrical Engineering Material
S.P. Seth
14.
Measurement and Instrumentation

(i)

(ii)

Electrical & Electronic Measurement and Instrumentation

Electronic Instrumentation

A. K. Sahney

H. S. Kalsi


ELECTRICAL ENGINEERING

S.No.
SUBJECT
AUTHOR
1.
Electronic Devices and Circuits & Analog Electronics--

(i)

(ii)

(iii)

(iv)

(v)

(vi)

Integrated electronics : Analog and Digital Circuit and system

Microelectronic Circuits

Electronic Devices and Circuits

OP Amp and linear Integrated Circuit

Solid State electronic devices

Semiconductor devices

Jacob Millman & Christos C. Halkias

Sedra & Smith

J.B. Gupta

Ramakant A. Gayakwad

Streetman and Banerjee

S.M.Sze

2.
Communication System

(i)

(ii)

(iii)

(iv)

(v)

Communication System

An introduction to Analog and Digital Communication

Communication System : Analog and Digital

Modern Digital and Analog Communication System

Electronic Communication System

Simon Haykins

Simon Haykins

Singh and Sapre

B.P. Lathi

Kennedyand Davis

3.
Signal and System
Oppenheim and Willsky
4.
Optical Fiber Communication
Senior
5.
Satellite Communications
Pratt and Bostian
6.
Monochrome and colour
R.R. Gulati
7.
Control System

(i)

(ii)

(iii)

Control System Engg.

Automatic Control System

Linear Control System

I.G. Nagrath & M. Gopal

B.C. Kuo

B.S. Manke

8.
Electro Magnetic Theory

(i)

(ii)

(iii)

(iv)

Elements of Engineering Electromagnetics

Elements of Electromagnetics

Engineering Electromagnetics

Antenna and Wave Propagation

N. N. Rao

Sadiku

W.H.Hayt

K.D. Prasad

9.
Digital Electronics

(i)

(ii)

(iii)

Digital Design

Digital Systems

Modern Digital Electronics

M. Morris Mano

Tocci & Widmer

R. P. Jain

10.
Computer Engg.

(i)

(ii)

Microprocessor Architecture, Programming & Application

Computer Organization and Structure

Ramesh S. Gaonkar

Stalling

11.
Microwave Engg.

(i)

(ii)

(iii)

Microwave Devices and Circuits

Microwave Engineering

Microwave Engineering

Liao

Sanjeev Gupta

Pozar

12.
Network Theory

(i)

(ii)

Networks and Systems

Engineering Circuit Analysis

D. Roy Chaudhary

Hayt

13.
Electrical Engineering Material
S.P. Seth
14.
Measurement and Instrumentation

(i)

(ii)

Electrical & Electronic Measurement and Instrumentation

Electronic Instrumentation

A. K. Sahney

H. S. Kalsi

15.
Electrical Machine

(i)

(ii)

Electrical Machinery

Electrical Machines

PS Bhimra

Nagrath & Kothari

16.
Power System

(i)

(ii)

Power System Engg.

Electric Power Systems

Nagrath & Kothari

CL Wadhwa

17.
Power Electronics
PS Bhimra


CIVIL ENGINEERING

S.NO.

SUBJECT

AUTHOR

1.
Strength of Materials /Mechanics of Structure

Gare & Timoshenko, E.Popove, L. Singer, B.C. Punamia

2.
Theory of Structures/ Analysis of Structure
S. Ramamurtham, L.S. Negi & Jangit, Gupta & Pandit, C.S. Reddy
3.
Construction Planning &Management

(i)

(ii)

(iii)

PERT -CPM

Engg. Economy & unsolved Problems on PERT-CPM

Equipment

B.C. Punamia

U.K. Shrivastav

PEURIFOY

4.
Soil Mechanics & Foundation Engg.
Gopal Ranjan & Rao,Venkat Ramaiha,
S. K. Garg, B.C. Punamia
5.
Fluid Mechanics and Fluid Machines
Modi & Seth,
R. K. Bansal, A.K.Jain
K.Subramanyam, Jagdish Lal.
6.
Environmental Engg.
B.C. Punamia(Part I & II), S.K. Garg (Part-I & II), Peavy, Metcalf & Eddy
7.
Highway Engineering
Khanna & Justo, Kadiyali
8.
Railway Engineering
Saxena & Arora
9.
Airport Engineering
Saxena & Arora
10.
Docks & Harbours Rangwala
11. Building Materials Rangwala, M.L. Gambhir
12. R.C.C. Design B.C. Punamia, A.K. Jain, I.S. Code-456----------2000
13. Steel Design S.K. Duggal, L.S. Negi, I.S. Code-800
14. Plastic Analysis
Manicka Selvam


MECHANICAL ENGINEERING

S.NO.

SUBJECT

AUTHOR

1.
Engg. Thermodynamics
P.K. Nag
2.
I.C. Engine
M.L. Mathur, RP Sharma
3.
Gas Turbine and Propulsive Systems
P.R. Khajuria & S.P. Dubey
4.
Fluid Mechanics
Modi & Seth, R.K Bansal
5.
Compressible Flow
S.M. Yahya
6.
Heat and Mass Transfer
JP Hollman,
R.C. Sachdeva
7.
Refrigeration and Air Conditioning
CP Arora
Domkundwar
8.
Fluid Machinery
Jagdish Lal
RK Bansal
9.
Theory of Machines
RS Khurmi
Malik & Ghosh
10.
Mechanical Vibration
Grover
11.
Machine Design
Shigley
VB Bhandari
12.
Material Science
WD Callister
IP Singh
13.
Production Engg.
Kalpkjian Schmid
Amitabh Ghosh & AK Malik
14.
Industrial Engg.
O P Khanna
Buffa & Sarin
15.
Operations Research
Kanti Swarup

16.

Strength of Materials

Timoshenko
B.C. Punamia

Rama Murtham

IES(2010)

No.F. 2/4/2009-E.I(B): A combined competitive examination for recruitment to the Services/posts mentioned in para 2 below will be held by the Union Public Service Commission at AGARTLA, AHMEDABAD, AIZWAL, ALIGARH, ALLAHABAD, BANGALORE, BAREILLY, BHOPAL,KOLKATA (CALCUTTA), CHANDIGARH, CHENNAI, CUTTACK, DEHRADUN, DELHI, DHARWAR, DISPUR (GUWAHATI), GANGTOK, HYDERABAD, IMPHAL, ITANAGAR, JAIPUR, JAMMU, JORHAT, KOCHI , KOHIMA, KOLKATA , LUCKNOW, MADURAI, MUMBAI, NAGPUR, PANAJI (GOA), PATNA, PORTBLAIR, RAIPUR, RANCHI, SAMBALPUR, SHILLONG, SHIMLA, SRINAGAR, THIRUVANANTHAPURAM, TIRUPATI, UDAIPUR AND VISHAKHAPATNAM commencing on 26th June, 2010 in accordance with the Rules published by the Ministry of Railways (Railway Board) in the Gazette of India dated the 30th January, 2010.

THE CENTRES AND THE DATE OF HOLDING THE EXAMINATION AS MENTIONED ABOVE ARE LIABLE TO BE CHANGED AT THE DISCRETION OF THE COMMISSION. WHILE EVERY EFFORT WILL BE MADE TO ALLOT THE CANDIDATES TO THE CENTRE OF THEIR CHOICE FOR EXAMINATION, THE COMMISSION MAY, AT THEIR DISCRETION, ALLOT A DIFFERENT CENTRE TO A CANDIDATE WHEN CIRCUMSTANCES SO WARRANT. CANDIDATES ADMITTED TO THE EXAMINATION WILL BE INFORMED OF THE TIME TABLE AND PLACE OR PLACES OF Examination.

The candidates should note that no request for change of centre will normally be granted. However, when a candidate desires a change in centre from the one he had indicated in his Application form for the Examination, he must send a letter addressed to the Secretary, Union Public Service Commission giving full justification as to why he desires a change in centre. Such requests will be considered on merits but requests received in the Commission’s Office after 02nd April, 2010 will not be entertained under any circumstances nor will such communications be replied to.

Recruitment on the results of this examination will be made to the Services/posts under the following categories:-

Category I—Civil Engineering.

Category II—Mechanical Engineering.

Category III—Electrical Engineering.

Category IV—Electronics & Telecommunication Engineering.

The number of vacancies to be filled on the results of the examination is expected to be approximately 434 including 10 PH vacancies. The number of vacancies is liable to alteration.

Reservations will be made for candidates belonging to Scheduled Castes, Scheduled Tribes, Other Backward Classes and Physically Disabled Categories in respect of vacancies as may be fixed by the Government of India.

CATEGORY I - CIVIL ENGINEERING

Group A Services/Posts

(i) Indian Railway Service of Engineers.

(ii) Indian Railway Stores Service (Civil Engineering Posts).

(iii) Central Engineering Service.

(iv) Indian Defense Service of Engineers (Civil Engineering Posts).

(v) Indian Ordinance Factories Services (Engineering Branch) (Civil Engineering Posts)

(vi) Central Water Engineering (Gr. 'A') Service (Civil Engineering Posts).

(vii) Central Engineering Service (Roads) Group-A (Civil Engineering Posts).

(viii) Assistant Executive Engineer (Civil) in P&T Building Works (Gr'A') Service

CATEGORY II - MECHANICAL ENGINEERING


Group A Services/Posts

(i) Indian Railway Service of MECHANICAL Engineers.

(ii) Indian Railway Stores Service (Mechanical Engineering Posts).

(iii) Central Water Engineering (Gr. 'A') Service (Mechanical Engineering Posts).

(iv) Central Power Engineering Service (Mechanical Engineering Posts).

(v) Indian Ordinance Factories Service.

(vi) Indian Naval Armament Service (Mechanical Engineering Posts).

(vii) Assistant Executive Engineer Group 'A' (Mechanical Engineering Posts) in the Corps of EME, Ministry of Defence.

(viii) Assistant Naval Store officer Grade I (Mechanical Engineering Posts) in Indian Navy.

(ix) Central Electrical & Mechanical Engineering Service (Mechanical Engineering Posts)

(x) Assistant Executive Engineer (Group A) in the Geological Survey of India.

(xi) Indian Inspection Service, Gr.'A' (Mechanical Engineering Posts).

(xii) Indian Supply Service, Gr.'A' (Mechanical Engineering Posts).

(xiii) Indian Defense Service of Engineers (Mechanical Engineering Posts).

(xiv) Central Engineering Service (Roads), Gr.'A' (Mech. Engineering Posts)

CATEGORY III - ELECTRICAL ENGINEERING

Group A Services/Posts

(i) Indian Railway Service of Electrical Engineers.

(ii) Indian Railway Stores Service (Electrical Engineering Posts).

(iii) Central Electrical & Mechanical Engineering Service (Electrical Engineering Posts).

(iv) Indian Naval Armament Service (Electrical Engineering Posts).

(v) Indian Ordnance Factories Service (Engg Branch) (Electrical Engg. Posts)

(vi) Central Power Engineering Service (Electrical Engineering Posts).

(vii) Indian Defense Service of Engineers (Electrical Engineering Posts).

(viii) Assistant Executive Engineer Group A (Electrical Engineering Posts) in the Corps of E.M.E, Ministry of Defence.

(vix) Assistant Naval Store officer Grade I (Electrical Engineering Posts) in Indian Navy.

(x) Indian Supply Service, Gr.'A' (Electrical Engineering Posts).

CATEGORY IV - ELECTRONICS AND TELECOMMUNICATION ENGINEERING

Group A Services/Posts

(i) Indian Railway Service of Signal Engineers.

(ii) Indian Railway Stores Service (Tele-communication/Electronics Engineering Posts).

(iii) Indian Ordnance Factories Service (Engineering Branch) (Electronics Engineering Posts).

(iv) Indian Naval Armament Service (Electronics Engineering Posts).

(v) Central Power Engineering Services (Electronics & Telecommunication Engineering Posts).

(vi) Assistant Executive Engineer Group ‘A’ (Electronics & Telecommunication Engineering Posts) in the Corps of E.M.E., Ministry of Defence.

(vii) Engineer (GCS-Gr."A") in Wireless Planning and Coordination Wing/Monitoring Organisation; M/o Communication and Information Technology (D/o Telecommunication)

(viii) Assistant Naval Stores officer Grade I (Electronics & Telecom Engineering Posts) in Indian Navy.

(ix) Indian Inspection Service, Gr.'A' (Electronics & Telecom Engineering Posts).

(x) Indian Supply Service, Gr.'A' (Electronics & Telecom Engineering Posts).

(xi) Indian Telecommunication Service, Group 'A'

Note:- Recruitment to the Services/Posts mentioned above will be made on the basis of the scheme(s) of examination prescribed in Appendix-I to the Notice. Candidates who are declared qualified on the results of written part of the examination will be required to indicate their preference for Services/Posts at the appropriate time in the detailed application form.

N.B.(i) - Departmental candidates are the candidates admitted to the examination under age relaxation vide Para 3 (II). Such candidates may give their preference in the detailed application form for the services/posts in other ministries/departments also.

N.B. (ii)—Candidates admitted to the examination under the proviso to para 3 (III) will be considered only for the posts mentioned in the said proviso, and their preference for other Services and Posts, if any, will be ignored.

N.B. (iii)—The candidates will be allotted to various Services/Posts strictly in accordance with their merit position, preferences exercised by them and number of vacancies, subject to their medical fitness.

B. A candidate may apply for admission to the examination in respect of any one of the categories of the Services/Posts mentioned in para 2 above viz. Civil Engineering or Mechanical Engineering or Electrical Engineering or Electronics & Telecommunication Engineering.


Important

1. CANDIDATES TO ENSURE THEIR ELIGIBILITY FOR THE EXAMINATION:
The Candidates applying for the examination should ensure that they fulfill all eligibility condition for admission to examination. Their admission at all the stages of the examination will be purely provisional subject to satisfying the prescribed eligibility conditions

Mere issue of admission certificate to the candidate will not imply that his/her candidature has been finally cleared by the Commission.

Commission take up verification of eligibility conditions with reference to original documents only after the candidate has qualified for interview/Personality Test.

2 APPLICATION FORM :

The Commission proposes to make available online application submission for Engineering Services Examination 2010 from 6th February to 22nd February 2010 for which a separate notice is to be issued.

Candidates who wish to apply offline must apply in the Common application form devised by the Commission for its examinations, which can be purchased from the designated Head post Offices/Post Offices (specified in Appendix-III of the Notice) throughout the country against cash payment of Rs. 20/- (Rupees Twenty Only). Each such Form can be used only once and only for one examination.

In case of any difficulty in Application Forms from the designated HPOs/POs, the candidates should immediately contact the concerned post Master or UPSC's "FORMS SUPPLY MONITORING CELL" over Telephone No. 011-23389366/FAX No. 011-23387310. Candidates are advised to read carefully the "Instructions for filling up the Application form"given in Appendix of this Notice.


3. LAST DATE FOR RECEIPT OF APPLICATIONS :

All offline applications must reach the "Secretary, Union Public Service Commission, Dholpur House, Shahjahan Road, New Delhi - 110069" either by hand or by Post/Speed Post or by Courier, on or before the 2nd March, 2010.

However, in respect of candidates residing abroad or in certain remote localities specified in Para 6 of this Notice the last date for receipt of applications by Post/Speed Post only (not by Hand or by Courier) is 9th March, 2010.

4. PENALTY FOR WRONG ANSWERS (In Objective Type Papers) :

Candidates should note that there will be penalty (Negative Marking) for wrong answers marked by a candidate in the Objective Type Question Papers.

5. FACILITATION COUNTER AND WEBSITE FOR GUIDANCE OF CANDIDATES :

In case of any guidance/information/clarification regarding their applications, candidature etc. candidates can contact UPSC's Facilitation Counter near 'C' gate of its campus in person or over Telephone No. 011-23385271/FAX No. 011-23381125/011-23098543 on working days between 10.00 hrs to 17.00 hrs.

The Commission also has Website at address : http://www.upsc.gov.in over which the candidates can obtain details of the examination as well as information about registration of their applications, venue of the examination and results etc.

6. SPECIAL INSTRUCTIONS:

Candidates are advised to read carefully the instructions/guidelines for filling up the Application Form (Appendix II) and "Special Instructions to the candidates for "Conventional Type Tests and Objective Type Tests" (Appendix IV) (Part A and Part B)

7. Mobile Phone Not Allowed:

(a) Mobile phones, pagers or any other communication devices are not allowed inside the premises where the examination is being conducted. Any infringement of these instructions shall entail disciplinary action including ban from future examinations.

(b) Candidates are advised in their own interest not to bring any of the banned item including mobile phones/pagers to the venue of the examination, as arrangement for safekeeping can not be assured.

8. Candidates are advised not to bring any valuable costly items to the Examination Halls, as safe keeping of the same cannot be assured. Commission will not be responsible for any loss in this regard.

Government strives to have a workforce which reflects gender balance and women candidates are encouraged to apply.


Minimum Educational Qualification:

For admission to the examination, a candidate must have—

(a) obtained a degree in Engineering from a University incorporated by an Act of the Central or State Legislature in India or other Educational Institutions established by an Act of Parliament or declared to be deemed as Universities under Section 3 of the University Grants Commission Act, 1956; or

(b) passed Section A and B of the Institution Examinations of the Institution of Engineers (India); or

(c) obtained a degree/diploma in Engineering from such foreign University/College/Institution and under such conditions as may be recognised by the Government for the purpose from time to time, or

(d) passed Graduate Membership Examination of the Institute of Electronics and Telecommunication Engineers (India); or

(e) passed Associate Membership Examination Parts II and III/Sections A and B of the Aeronautical Society of India; or

(f) passed Graduate Membership Examination of the Institution of Electronics and Radio Engineers, London held after November, 1959.

Provided that a candidate for the post of Indian Naval Armament Service (Electronics Engineering Posts and Engineer Group 'A' in Wireless Planning and Coordination Wing/Monitoring Organisation) may possess any of the above qualifications or the qualification mentioned below namely:-

M.Sc. degree or its equivalent with Wireless Communication, Electronics, Radio Physics or Radio Engineering as a special subject.

NOTE-1—A candidate who has appeared at an examination the passing of which would render him educationally qualified for this examination, but has not been informed of the result, may apply for admission to the examination. A candidate who intends to appear at such a qualifying examination may also apply. Such candidates will be admitted to the examination, if otherwise eligible, but their admission would be deemed to be provisional and subject to cancellation, if they do not produce proof of having passed the requisite qualifying examination alongwith the detailed applications which will be required to be submitted by the candidates who qualify on the result of written part of the examination.

NOTE-2—In exceptional cases, the Commission may treat a candidate, who has not any of the qualifications prescribed in this rule, as educationally qualified provided that he has passed examinations conducted by other institutions the standard of which in the opinion of the Commission justifies his admission to the examination.

NOTE-3—A candidate who is otherwise qualified but who has taken a degree from a foreign University which is not recognised by Government, may also apply to the Commission and may be admitted to the examination at the discretion of the Commission.

(iv) Physical standards

Candidates must be physically fit according to physical standards for admission to Engineering Services Examination, 2010 as per guidelines given in Appendix-II of the rules for the Engineering Services Examination, 2010 published in the Gazette of India Extraordinary dated 30th January, 2010.

FEE:

A candidate seeking admission to Examination must pay to the Commission a fee of Rs. 100.00 (Rupees One hundred only) through a single Central Recruitment Fee stamp. Central Recruitment Fee Stamp of the requisite denomination. Central Recruitment Fee Stamp (NOT postage stamps) must be obtained from the post office and affixed on the application form in the space provided therein. The stamp may be got cancelled from the issuing Post Office with the date stamp of the post office in such a manner that the impression of the cancellation mark partially overflows on the application form itself but within the space provided on the form. The impression of the cancellation mark should be clear and distinct to facilitate the identification of date and the Post Office of issue.

Candidates residing abroad should deposit the prescribed fee in the office of India’s High Commissioner, Ambassador or representative abroad as the case may be for credit to account head "051-Public Service Commission-Examination Fees" and attach the receipt with the application.

APPLICATION NOT COMPLYING WITH THIS REQUIREMENT WILL BE SUMMARILY REJECTED.

ALL FEMALES CANDIDATES AND CANDIDATES BELONGING TO SCHEDULED CASTE/SCHEDULED TRIBE/PHYSICALLY HANDICAPPED CATEGORIES ARE EXEMPTED FROM PAYMENT OF FEE. NO FEE EXEMPTION IS, HOWEVER, AVAILABLE TO OBC CANDIDATES AND THEY ARE REQUIRED TO PAY THE PRESCRIBED FEE IN FULL.

Physically handicapped persons are exempted from the payment of fee provided they are otherwise eligible for appointment to the Services/posts to be filled on the results of this examination on the basis of the standards of medical fitness for these Service/posts (including any concessions specifically extended to the physically handicapped). A physically handicapped candidate claiming age relaxation/fee concession will be required by the Commission to submit along with their detailed application form, a certified copy of the certificate from a Government hospital/Medical Board in support of his claim for being physically handicapped.

NOTE: Notwithstanding the aforesaid provision for age relaxation/fee exemption, a physically handicapped candidate will be considered to be eligible for appointment only if he (after such physical examination as the Government or the appointing authority, as the case may be, may prescribe) is found to satisfy the requirements of physical and medical standards for the concerned Services/Posts to be allocated to Physically Handicapped candidates by the Government.

‘Postage Stamps’ will in no case be accepted in lieu of Central Recruitment Fee stamp.

CANDIDATES SHOULD NOTE THAT THE FEE SENT THROUGH BANK DRAFT, INDIAN POSTAL ORDERS, MONEY ORDER, CROSSED CHEQUE, CURRENCY NOTES OR TREASURY CHALLAN ETC. WILL NOT BE ACCEPTED BY THE COMMISSION AND SUCH APPLICATIONS WILL BE TREATED AS WITHOUT FEE AND WILL BE SUMMARILY REJECTED.

Note (i) : Applications not accompanied by the Prescribed Fee (Unless remission of fee is claimed) shall be summarily rejected.

Note (ii) : Fee once paid shall not be refunded under any circumstances nor can the fee be held in reserve for any other examination or selection.

Note (iii):- If any candidate who took the Engineering Services Examination held in 2009 wishes to apply for admission to this examination, he must submit his application so as to reach the Commission’s Office by the prescribed date without waiting for the results or an offer of appointment.

HOW TO APPLY:
a) The Commission proposes to make available online application submission for Engineering Services Examination 2010 from 6th February to 22nd February 2010 for which a separate notice is to be issued.

(b) The UPSC have developed an application form common for all their examination which will be processed on computerised machines. This application form along with an Information Brochure containing general instructions for filling up the form, an acknowledgement card and an envelope for sending the application is obtainable from the designated Head Post Offices/Post Offices throughout the country as listed in Appendix-III of Notice against cash payment of Rs. 20/- (Rupees twenty only). Form should be purchased from the designated Post Offices only and not from any other agency. This form can be used only once and for only one examination. Candidates who wish to apply offline must use the form supplied with the Information Brochure only and they should in no case use photocopy/reproduction/unauthorisedly printed copy of the Form. Since this form is electronically scannable, due care should be taken to fill up the application form correctly. While filling up the application form, please rear to detailed instructions given in Appendix-II of this Notice. The candidate should also fill up in the relevant places of the Acknowledgement Card, their Application Form Number (8-digit) and the name of the Examination. The applicants are required to affix the postage stamp of Rs. 6/- on the Acknowledgement Cards and send the same alongwith application form to UPSC. If an applicant fails to affix the postage stamp of requisite amount his acknowledgement card will not be despatched and Commission will not be responsible for non-receipt of acknowledgement card by the applicant. The duly filled in application form and the acknowledgement card should then be mailed in the special envelope supplied with the Information Brochure. The candidate should also write the name of Examination viz. "Engineering Services Examination, 2010" on the envelope before despatching it to "Secretary, Union Public Service Commission, Dholpur House, New Delhi-110069".

(c) All candidates, whether already in Government Service, or in Government owned industrial undertakings or other similar organisations or in private employment, should submit their applications direct to the Commission. If any candidate forwards his application through his employer and it reaches the Union Public Service Commission late, the application, even if submitted to the employer before the closing date, will not be considered.

Persons, already in Government service whether in a permanent or temporary capacity or as work-charged employees other than casual or daily rated employees or those serving under public enterprises are, however, required to submit an undertaking that they have informed in writing their Head of Office/Department that they have applied for the Examination. Candidates should note that in case communication is received from their employer by the Commission withholding permission to the candidates applying for/appearing at the Examination, their application will be liable to be rejected/candidature will be liable to be cancelled.

Note 1: WHILE FILLING IN HIS APPLICATION FORM, THE CANDIDATE SHOULD CAREFULLY DECIDE ABOUT HIS CHOICE FOR THE CENTRE AND ENGINEERING DISCIPLINE FOR THE EXAMINATION. MORE THAN ONE APPLICATION FROM A CANDIDATE GIVING DIFFERENT CENTRES AND OR ENGINEERING DISCIPLINE WILL NOT BE ACCEPTED IN ANY CASE. EVEN IF A CANDIDATE SENDS MORE THAN ONE COMPLETED APPLICATION, THE COMMISSION WILL ACCEPT ONLY ONE APPLICATION AT THEIR DISCRETION AND THE COMMISSION’S DECISION IN THE MATTER SHALL BE FINAL.

IF ANY CANDIDATE APPEARS AT A CENTRE ENGINEERING DISCIPLINE OTHER THAN THE ONE INDICATED BY THE COMMISSION IN HIS ADMISSION CERTIFICATE, THE PAPERS OF SUCH A CANDIDATE WILL NOT BE VALUED AND HIS CANDIDATURE WILL BE LIABLE TO CANCELLATION.

Note 2. SINCE THESE APPLICATION FORMS ARE TO BE PROCESSED IN A COMPUTERISED SYSTEM, DUE CARE SHOULD BE TAKEN BY THE CANDIDATES TO FILL UP THEIR APPLICATION FORM CORRECTLY. NECESSARY INSTRUCTIONS FOR FILLING UP THE FORM MAY BE SEEN AT APPENDIX II. NO COLUMN OF THE APPLICATION SHOULD BE LEFT BLANK. INCOMPLETE OR DEFECTIVE APPLICATIONS SHALL BE SUMMARILY REJECTED. NO REPRESENTATION OR CORRESPONDENCE REGARDING SUCH REJECTION SHALL BE ENTERTAINED UNDER ANY CIRCUMSTANCES.

CANDIDATES ARE NOT REQUIRED TO SUBMIT ALONG WITH THEIR APPLICATIONS ANY CERTIFICATES IN SUPPORT OF THEIR CLAIMS REGARDING AGE, EDUCATIONAL QUALIFICATIONS, SCHEDULED CASTES/SCHEDULED TRIBES/OTHER BACKWARD CLASSES AND PHYSICALLY HANDICAPPED ETC.

The candidates applying for the Examination should ensure that they fulfill all the eligibility conditions for admission to the Examination. Their admission at all the stages of examination for which they are admitted by the Commission viz. Written Examination and Interview Test will be purely provisional, subject to their satisfying the prescribed eligibility conditions. If on verification at any time before or after the Written examination or Interview Test, it is found that they do not fulfill any of the eligibility conditions, their candidature for the Examination will be cancelled by the Commission.

Candidates are requested to keep ready the attested copies of the following documents for submission to the Commission soon after the declaration of the results of the written Examination which is likely to be declared in the month of December, 2010.

1. Certificate of Age.

2. Certificate of Educational Qualification.

3. Certificate in support of claim to belong to Scheduled Caste, Scheduled Tribe and Other Backward Classes, where applicable.

4. Certificate in support of claim for age/fee concession, where applicable.

Immediately after the declaration of the written results successful candidates will be sent a form by the Commission requiring additional information to be furnished. Attested copies of the above mentioned certificates will have to be sent to the Commission at that time. The originals will have to b produced at the time of interview. If any of their claims is found to be incorrect, they may render themselves liable to disciplinary action by the Commission in terms of Rule 11 of the Rules for Engineering Services Examination, 2010 notified in the Gazette of India extraordinary dated 30th January, 2010 and also reproduced below:-

A candidate who is or has been declared by the Commission to be guilty of:

(i) obtaining support for his candidature by any means; or

(ii) impersonating; or

(iii) procuring impersonation by any person; or

(iv) submitting fabricated documents or documents which have been tampered with; or

(v) making statements which are incorrect or false or suppressing material information; or

(vi) resorting to any other irregular or improper means in connection with his candidature for the examination; or

(vii) using unfair means during the examination; or

(viii) writing irrelevant matter including obscene language or pornographic matter in the script(s); or

(ix) misbehaving in any other manner in the examination hall; or

(x) harassing or doing bodily harm to the staff employed by the Commission for the conduct of their examinations; or

(xi) being in possession of or using any cellular/mobile phone/pager or any other electronic equipment or device or any other equipment capable of being used as a communication device during the examination.

(xii) violating any of the instructions issued to candidates along with their admission certificate permitting them to take the examination; or

(xiii) attempting to commit or as the case may be abetting the commission of all or any of the acts specified in the foregoing clauses, may in addition to rendering himself liable to criminal prosecution, be liable—

(a) to be disqualified by the Commission from the examination for which is a candidate; and/or

(b) to be debarred either permanently or for a specified period—

(i) by the Commission from any examination or selection held by them;

(ii) by the Central Government from any employment under them; and

(c) if he is already in service under Government to disciplinary action under the appropriate rules.

Provided that no penalty under this rule shall be imposed except after—

(i) giving the candidate an opportunity of making such representation in writing as he may wish to make in that behalf, and

(ii) taking the representation if any submitted by the candidate, within the period allowed to him into consideration.

LAST DATE FOR RECEIPT OF OFFLINE APPLICATIONS
he completed offline application form must reach the Secretary, Union Public Service Commission, Dholpur House, New Delhi-110069 on or before 2nd March, 2010.

(ii) In respect of offline applications received only by post (by post/speed post) from the candidates residing in Assam, Meghalaya, Arunachal Pradesh, Mizoram, Manipur, Nagaland, Tripura, Sikkim, Jammu & Kashmir, Lahaul and Spiti District and Pangi sub-division of Chamba District of Himachal Pradesh, Andaman and Nicobar Islands or Lashadweep or aboard, the last date of receipt of applications is 9th March, 2010. The benefit of extended time, will be available only in respect of applications received by post/Speed post from the above mentioned areas/regions. In the case of applications received by hand or through courier service, benefit of extended time will not be available regardless of the place of residence of the applicant.

Candidates who are claiming the benefit of extended time should clearly indicate in Column 13 (II) of the application form, the area code of the particular area or region (e.g. Assam, Meghalaya, J&K etc.) where they are residing. In case they fail to do so, the benefit of extended time will not be allowed to them.

NOTE (I): Candidates should clearly note that the Commission will in no case be responsible for non-receipt of their application or any delay in receipt thereof on any account whatsoever. No application received after the prescribed last date will be entertained under any circumstances and all the late applications will be summarily rejected. They should, therefore, ensure that their applications reach the Commission’s Office on or before the prescribed last date.

NOTE (II): Candidates can also deliver their applications personally at the Commission’s counter against proper acknowledgement. The Commission will not be responsible for the applications delivered to any other functionary of the Commission.

NOTE (III): Applications received through Couriers or Courier Services of any type shall be treated as having been received "By hand" at the Commission’s Counter.




Friday, October 23, 2009

GATE-2010(ECE)

DEAR GATE ASPIRANTS 2010.

here is agood news for everybody.

the following books really help u ...

NETWORK THEORY

Circuit Analysis Theory And Practice by Robbins and Miller

http://rapidshare.com/files/60142755/Circuit_Analysis_Theory_And_Practice_by_robbins_and_miller.pdf

Engineering circuit analysis by hayt,kemmerly,durbin solution manual

http://www.4shared.com/file/66510594/498cbb70/Engineering_Circuit_Analysis_6Ed_-_Hayt_Solutions_Manual.html

Basic circuit analysis Schaum series

http://rapidshare.com/files/60151397/basic_circuit_analysis_Schaum_series.pdf


BASIC ELECTRONICS AND ANALOG CIRCUITS

Microelectronic circuits by Sedra Smith,5th ed
part1 (99MB)
http://www.megaupload.com/?d=CH3EV2E8
part2 (97MB)
http://www.megaupload.com/?d=3QB8OJ1Z

Microelectronic circuits by Sedra/Smith solutions

http://www.megaupload.com/?d=W3XROX84


Thomas L Floyd “Electronic Devices"

part1--> http://rapidshare.com/files/93237193/Floyd_-_Electronic_Devices_CC_7e.part1.rar.html
part 2--> http://rapidshare.com/files/93237155/Floyd_-_Electronic_Devices_CC_7e.part2.rar.html


Microelectronics Devices and Circuits by Clifton G. Fonstad

http://rapidshare.com/files/21889156/Fonstad_MicroelecDevCkt_2006EEd.pdf


Op Amps for Everyone by Ron Mancini

http://rapidshare.de/files/21333448/MANCINI__R.__2002_._Op_Amps_for_Everyone.rar


Op Amps - Design Application and Troubleshooting.

http://www.4shared.com/account/file/39632044/121c901e/TERRELL_D_L__1996__Op_Amps_-_Design_Application_and_Troubleshooting__2nd_ed_.html

Operational Amplifiers: Introduction to CMOS andComparators

http://www.4shared.com/file/39640424/5b668bdf/Electronics-OperationalAmplifiers-IntroductiontoCMOSOP-AMPSandComparators.html?s=1

High Power Microwaves

http://www.paid4share.net/file/10450/9780750307062-0750307064-rar.html


DIGITAL DESIGN

principles of Modern Digital Design

http://rapidshare.com/files/74654671/Modern_Digital_Design.rar

Digital Electronics Demystified-TMH

http://rapidshare.com/files/2279140/McGraw.Hill.Digital.Electronics.Demystified.rar

Complete Digital Design: A Comprehensive Guide to Digital Electronics and Computer System Architecture

http://www.icefile.info/index.php?page=main&id=fd53b1819&name=0071409270.rar


SIGNALS AND SYSTEMS

Signals and Systems by Simon Haykin

http://rapidshare.com/files/52822082/S_S_Haykin.djvu

Schaum's Outline of Signals and Systems

http://rapidshare.com/files/22155573/Signals_And_Systems__Schaum_.rar.html


CONTROL SYSTEMS

Ogata - Discrete-Time Control Systems

http://www.4shared.com/file/61770903/81f06db/Ogata_-_Discrete-Time_Control_Systems.html?start=

Modern control technology components and systems

http://rapidshare.com/files/112380295/Modern_control_technology_components_and_systems.pdf

systems and control

http://rapidshare.com/files/110477253/Systems_and_Control.rar


COMMUNICATION SYSTEMS


Communication Systems by Simon Haykin 4 Edition

http://rapidshare.com/files/1896159/Communication_Systems_by_Simon_Haykin__4e.rar

Solution Manual For Communication Systems 4th edt by Simon Haykin

http://rapidshare.com/files/48071351/Solution_Manual_For_Communication_Systems__4th_edt__by_Simon_Haykin.rar

Principles of Communication Systems: Herbert Taub,Donald L. Schilling

http://rapidshare.com/files/112844510/taub_schilling_commns.rar


MATHEMATICS

Advanced Engineering Mathematics (9th Edition) by Kreyszig

http://rapidshare.com/files/121789920/Advanced_Engineering_Mathematics__Ed._9-_Erwin_Kreyzig.djvu

or

http://rapidshare.com/files/146431546/17_K_AEM_aff.rar


Solution Manual for Advanced Engineering Mathematics (9th Edition) by Kreyszig

http://www.4shared.com/file/33514775/3636c492/Solutions_Manual_Instructors_Advanced_Engineering_Mathematics_8Ed_-_Erwin_Kreyszig.html?dirPwdVerified=597066c5


Advanced Engineering Mathematics by Palgrave Macmillan

http://rapidshare.com/files/70334977/Advanced_Engineering_Mathematics.rar


Advanced engineering mathematics by Stroud K.A.Booth

http://rapidshare.com/files/82821466/Advanced_engineering_mathematics_-_Stroud_K_A___Booth_D.J.djvu


Advanced Engineering Mathematics by By Dean G. Duffy

http://rapidshare.com/files/66193160/advanced_engineering_mathematics.pdf


Introductory Circuit Analysis, 10th Edition
by Robert L. Boylestad

http://rapidshare.com/files/123174352/013097417x.rar


Power Electronics Handbook (Engineering)
by Muhammad H. Rashid

http://rapidshare.com/files/97921259/power.electronics.handbook-0125816502.rar


Schaum's Outline Series
Schaum's Outline of Matrix Operations
by Richard Bronson

http://rapidshare.com/files/12364631/Schaum_s_Outline_of_Matrix_Operations_0070079781.rar

Schaum's Easy Outline: Calculus
by Frank Ayres

htp://ifile.it/yln207/mathematics_-_schaums_easy_outlines_-_calculus_-_f_ayres_jr__e_mendelson_mcgraw-hill_-_2000_0070527105.zip

Schaum's Outline of Advanced Calculus, Second Edition
by Robert C. Wrede

http://www.mediafire.com/?a2mji7t1dbj

Schaum's Outline of Theory and Problems of Differential and Integral Calculus (Schaums Outline Series)
by Frank Ayres, Elliott Mendelson

http://rapidshare.com/files/106481620/0070026629_McGraw.Hill_-_Schaums.Outline.of.Theory.and.Problems.of.Differential.and.Integral.Calculu


Schaum's Easy Outline Differential Equations
by Richard Bronson

http://rapidshare.com/files/103092118/sh_aum02.pdf

Schaum's Outline of Probability, Random Variables, and Random Processes, 1st Edition
by Hwei Hsu

http://rapidshare.com/files/143264706/McGraw-Hill_.Schaum_s_Outlines_-_Probability__Random_Variables_and_Random_Processes._1997_.pdf

Schaum's Outline of Electronic Devices and Circuits, Second Edition
by Jimmie J. Cathey

http://rapidshare.com/files/59370868/Electronic_Devices_and_Circuits.rar

Schaum's Outline of Electric Circuits 4th edition 2002-12
by Mahmood Nahvi, Joseph Edminister, Joseph A. Edminister

http://rapidshare.com/files/99402453/schaum_s.outlines.theory.and.problems.of.electric.circuits.rar


Schaum's Outline of Basic Circuit Analysis, 2nd Edition
by John O'Malley

http://rapidshare.com/files/99183777/electronics_-_schaum_s_outline_-_theory___problems_of_basic_circuit_analysis.rar

Schaum's Outline of Digital Principles, 3rd Edition
by Roger L. Tokheim

http://rapidshare.com/files/1288980/SO07.rar


Schaum's Outline of Feedback and Control Systems (Schaum's)
by Allen J. Stubberud Ivan J. Williams Joseph J. DiStefano

htp://ifile.it/c5shxa/vsofts.net_can_blow_me.zip


Schaum's Outline of Electromagnetics
by Joseph Edminister

http://rapidshare.com/files/28425520/0FAC00CD-ABC1-4685-A5FE-77F41C2F0025.rar
pass : books_for_all


SCHAUM's Outline Series Theory and Problems of Machine Design
by Alfred Holowenko, Allen Hall, Herman Laughlin

htp://rapidshare.com/files/36089623/SO_MD_1961.zip


Microwave Communications Engineering Volume 1
by Ian A. Glover, Steve Pennock, Peter Shepherd

http://rapidshare.com/files/152312026/MW.pdf